Factors Resulting In Micron Indentation Hardness Descending In Indentation Tests

Some factors that affect the experimental results in nanoindentation tests such as the contact depth, contact area, load and loading duration are analyzed in this article. Combining with the results of finite element numerical simulation, we find that the creep property of the tested material is one of the important factors causing the micron indentation hardness descending with the increase of indentation depth. The analysis of experimental results with different indentation depths demonstrates that the hardness decrease can be bated if the continuous stiffness measurement technique is not adopted; this indicates that the test method itself may also be one of the factors causing the hardness being descended.

Creep behavior of woven roving grp beam in three-point bending

The creep and relaxation behaviour of laminated glass fibre reinforced plastics (GRP) in three-point bending were studied both experimentally and analytically. Creep and relaxation experiments were carried out on eight types of specimens, consisting of glass fibre fabric reinforced epoxy beams. While the bending deflexion and creep strains were measured in the creep tests, the load and relaxation strain were recorded in the relaxation tests. Marked creep effects were seen in the tests, where the environment temperature was 50°C and the period of the measurement was 60 min. An attempt to predict the creep deflexion and relaxation behaviour was made. The transverse shear effect on creep deflexion was taken into account. The predicted results were compared with experimental ones. They were found to be in reasonable agreement, but the linearization assumption, upon which the relaxation behaviour analysis was based, appears to lead to larger inaccuracies in the results.

Release of Sulfur and Chlorine during Cofiring RDF and Coal in an Internally Circulating Fluidized Bed

An internally circulating fluidized bed (ICFB) was applied to investigate the behavior of chlorine and sulfur during cofiring RDF and coal. The pollutant emissions in the flue gas were measured by Fourier transform infrared (FTIR) spectrometry (Gasmet DX-3000). In the tests, the concentrations of the species CO, CO2, HCl, and SO2 were measured online. Results indicated when cofiring RDF and char, due to the higher content of chlorine in RDF, the formation of HCl significantly increases. The concentration of SO2 is relatively low because alkaline metal in the fuel ash can absorb SO2. The concentration of CO emission during firing pure RDF is relatively higher and fluctuates sharply. With the CaO addition, the sulfur absorption by calcium quickly increases, and the desulfuration ratio is bigger than the dechlorination ratio. The chemical equilibrium method is applied to predict the behavior of chlorine. Results show that gaseous HCl emission increases with increasing RDF fraction, and gaseous KCl and NaCl formation might occur.

Release of Sulfur and Chlorine During Cofiring Rdf and Coal In An Internally Circulating Fluidized Bed

An internally circulating fluidized bed (ICFB) was applied to investigate the behavior of chlorine and sulfur during cofiring RDF and coal. The pollutant emissions in the flue gas were measured by Fourier transform infrared (FTIR) spectrometry (Gasmet DX-3000). In the tests, the concentrations of the species CO, CO2, HCl, and SO2 were measured online. Results indicated when cofiring RDF and char, due to the higher content of chlorine in RDF, the formation of HCl significantly increases. The concentration Of SO2 is relatively low because alkaline metal in the fuel ash can absorb SO2. The concentration of CO emission during firing pure RDF is relatively higher and fluctuates sharply. With the CaO addition, the sulfur absorption by calcium quickly increases, and the desulfuration ratio is bigger than the dechlorination ratio. The chemical equilibrium method is applied to predict the behavior of chlorine. Results show that gaseous HCl emission increases with increasing RDF fraction, and gaseous KCl and NaCl formation might occur.

Molecular phylogeography and population structure of a mid-elevation montane frog Leptobrachium ailaonicum in a fragmented habitat of southwest China

Leptobrachium ailaonicum is a vulnerable anuran restricted to a patchy distribution associated with small mountain streams surrounded by forested slopes at mid-elevations (approximately 2000-2600 m) in the subtropical Mount Wuliang and Mount Ailao ranges in southwest China (Yunnan Province) and northern Vietnam. Given high habitat specificity and lack of suitable habitat in lower elevations between these ranges, we hypothesized limited gene flow between populations throughout its range. We used two mitochondrial genes to construct a phylogeographic pattern within this species in order to test our hypothesis. We also examined whether this phylogeographic pattern is a response to past geological events and/or climatic oscillations. A total of 1989 base pairs were obtained from 81 individuals of nine populations yielding 51 unique haplotypes. Both Bayesian and maximum parsimony phylogenetic analyses revealed four deeply divergent and reciprocally monophyletic mtDNA lineages that approximately correspond to four geographical regions separated by deep river valleys. These results suggest a long history of allopatric separation by vicariance. The distinct geographic distributions of four major clades and the estimated divergence time suggest spatial and temporal separations that coincide with climatic and paleogeographic changes following the orogeny and uplift of Mount Ailao during the late Miocene to mid Pliocene in southwest China. At the southern distribution, the presence of two sympatric yet differentiated clades in two areas are interpreted as a result of secondary contact between previously allopatric populations during cooler Pleistocene glacial cycles. Analysis of molecular variance indicates that most of the observed genetic variation occurs among the four regions implying long-term interruption of maternal gene flow, suggesting that L ailaonicum may represent more than one distinct species and should at least be separated into four management units corresponding to these four geographic lineages for conservation. (C) 2009 Elsevier Inc. All rights reserved.

Synthesized different derivatives of low molecular fucoidan extracted from Laminaria japonica and their potential antioxidant activity in vitro

Six low molecular fucoidan (DFPS) derivatives were synthesized successfully, and their potential antioxidant activities were investigated employing various established in vitro systems. All DFPS derivatives possessed considerable antioxidant activity, and had stronger antioxidant ability than DFPS in certain tests. The benzoylated DFPS (PHDF) showed strongest scavenging activity on superoxide, hydroxyl and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, however, DFPS exhibited greatest reducing power. Available data suggested that substituted groups of DFPS played an important role on antioxidant activity, and the mechanism on influence the antioxidant activity of samples of substituted group was indicated. (C) 2009 Elsevier B.V. All rights reserved.

Synthesized oversulphated, acetylated and benzoylated derivatives of fucoidan extracted from Laminaria japonica and their potential antioxidant activity in vitro

Three sulphated polysaccharide derivatives (oversulphated, acetylated and benzoylated fucoidan) were successfully synthesized, and their antioxidant activities were investigated employing various established in vitro systems. A novel catalyst N-bromosuccinimide (NBS) was used in acetylation and benzoylation reaction, and the degree of acetylation was evaluated using IR and NMR spectra. Both fucoidan derivatives possessed considerable antioxidant activity, and had stronger antioxidant ability than fucoidan in certain tests. The benzoylated fucoidan showed strongest superoxide and hydroxyl radical scavenging activity, however, the acetylated fucoidan exhibited strongest activity on scavenging DPPH radical and reducing power. Available data obtained with in vitro models suggested that substituted groups of fucoidan played an important role on antioxidant activity. The mechanism on the antioxidant activity of sulphonyl, acetyl and benzoyl group is different. (C) 2008 Elsevier Ltd. All rights reserved.

Synthesized phosphorylated and aminated derivatives of fucoidan and their potential antioxidant activity in vitro

Three sulfated polysaccharide derivatives (phosphorylated and aminated fucoidan) were synthesized, and their potential antioxidant activities were investigated employing various established in vitro systems. Two methods were used in phosphorylation fucoidan: polyphosphoric acid and POCl3 method. Aminated fucoidan was prepared using the epichlorohydrin and ammonia water. All fucoidan derivatives possessed considerable antioxidant activity, and exhibited stronger antioxidant ability than fucoidan in certain tests. The phosphorylated fucoidan showed stronger hydroxyl radical and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and reducing power. The mechanism on influence the antioxidant activity of samples of phosphate and amino group was indicated. (C) 2008 Elsevier B.V. All rights reserved.

Corrosion resistance of steel with hot-dipped galvanized zinc and zinc alloy coatings in seawater

Hot-dipped galvanized zinc and zinc alloy coatings were used as the hot-dipped low alloy zinc coatings (aluminum content less than protective metallic coatings for steel structures in seawater in Chi- or equal to 10 wt%) is equal to or even lower than that of the pure na. Corrosion of the two coatings immersed in sea water in Qingdao zinc sheet, while the performance of the hot-dipped high alloy zinc and Xiamen for 6 years were introduced and analyzed, which pro-coatings is higher than that of the pure zinc sheet. The hot-dipped vides a basis for further development and applications of these coat- high alloy zinc coatings can be further developed for optimal tings in China. Tests proved that the anti-corrosion performance of formance in the future.

Experimental Study on the Thermal Argon Plasma Generation and Jet Length Change Characteristics at Atmospheric Pressure

The generation, jet length and flow-regime change characteristics of argon plasma issuing into ambient air have been experimentally examined. Different torch structures have been used in the tests. Laminar plasma jets can be generated within a rather wide range of working-gas flow rates, and an unsteady transitional flow state exists between the laminar and turbulent flow regimes. The high-temperature region length of the laminar plasma jet can be over an order longer than that of the turbulent plasma jet and increases with increasing argon flow rate or arc current, while the jet length of the turbulent plasma is less influenced by the generating parameters. The flow field of the plasma jet has very high radial gradients of plasma parameters, and a Reynolds number alone calculated in the ordinary manner may not adequately serve as a criterion for transition. The laminar plasma jet can have a higher velocity than that of an unsteady or turbulent jet. The long laminar plasma jet has good stiffness to withstand the impact of laterally injected cold gas and particulate matter. It could be used as a rather ideal object for fundamental studies and be applied to novel materials processing due to its attractive stable and adjustable properties.

次级束流线设备FRS和现有RIBLL2的优化

本文工作分为两个部分：第一部分是设计德国重离子研究中心（GSI）的一段新的次级束流线；第二部分计算了在建的R工已LLZ对裂变反应碎片的传输分离，同时为提高分离本领对RIBLLZ进行了优化计算和设计。FRS是德国重离子研究中心（GSI）的次级束流线。其分支FRS-CAVEB的终端是川JAD工N的实验终端，这条线的束流品质不理想（传输率只有0．1％），因此GSI拟将AI'AD州设备（原在CAVEB）移到CAVEC中，形成FRS一CAVEC束流线，又称FRS-R3Bcave。本文对FRS-CoveC进行了束流光学设计和计算，同时模拟了FRS-CAVEC对弹核碎裂反应的传输分离。新束线按计算结果安装了一个二极磁铁和3个四极磁铁，并通过了实验测试，测试结果表明：（1）系统具有良好的消色散特性，即系统在FRS出口和实验终端处达到了消色差。（2）系统的传输率基本符合理论计算值，相对CAVEB分支传输率提高了一个量级以上。当不放任何阻止物质在束流线上时，Ar主束传输率可以达到100％；当放置3mm厚的Sdntillator探测器在S2，S8，CaveC处时，主束传输率基本和理论计算值相近（640k-计算值，610k-实验值）。对比FRS-C八VEB的实验传输率（0．1％），可知通过改进，FRS-C八VEC的传输率将得到极大的改善。RIBLLZ是连接CSR两环之间的次级束流线。现有的RIBLLZ束流线设计的比较紧凑，立体角接收度大，使得所有粒子都可通过系统，可以作为零度质谱仪，尤其是可以将裂变产生的奇异核素注入到实验环进行质量测量。本文模拟了弹核碎片和裂变反应产生的次级束在现有的RIBLLZ上的传输情况。计算表明，现有的RIBLLZ对通过u裂变产生的大量较重奇异核素，具有很高的传输率。另一方面，现有的RIB七LZ在散焦面只有两个四极磁铁，为达到系统的消色差及较大的分辨率会使得Y方向的束流控制困难。基于此，对现有的R咸喝锻蓄尔＼一些改进计算。还理论计算比较了两个系统对裂变反应的传输分离情况。玺认算试知飞（1）优化后的RIBLLZ系统对束流在Y方向的控制将更灵活。（2）对裂变反应产物的传输，除了作为零度质谱仪外还可以作为单一核素的分离器。（3浑税盯确集磁系统的传输率对降能器厚度敏感度降低，对于u裂变反应产生的132sn的传输率，当降能器厚度从19／cmZ变化到39／clnu时，传输率下降20％，而未优化的RIBLLZ系统的传输率将下降90%。

Blends of linear low-density polyethylene and a diblock copolymer of hydrogenated polybutadiene and methyl methacrylate

Blends of linear low-density polyethylene (LLDPE) and a diblock copolymer of hydrogenated polybutadiene and methyl methacrylate [P(HB-b-MMA)] were studied by transimission electron microscope (TEM), differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD). At 10 wt% block copolymer content, block copolymer chains exist as spherical micelles and cylindrical micelles in LLDPE matrix. At 50 wt% block copolymer content, block copolymer chains mainly form cylindrical micelles. The core and corona of micelles consist of PMMA and PHB blocks, respectively. DSC results show that the total enthalpy of crystallization of the blends varies linearly with LLDPE weight percent, indicating no interactions in the crystalline phase. In the blends, no distortion of the unit cell is observed in WAXD tests.

FRACTURE-TOUGHNESS OF PHENOLPHTHALEIN POLYETHER KETONE

The static and impact fracture toughness of phenolphthalein polyether ketone (PEK-C) were studied at different temperatures. The static fracture toughness of PEK-C was evaluated via the linear elastic fracture mechanics (LEFM) and the J-integral analysis. Impact fracture toughness was also analyzed using the LEFM approach. Temperature and strain rate effects on the fracture toughness were also studied. The enhancement in static fracture toughness at 70 degrees C was thought to be caused by plastic crack tip blunting. The increase in impact fracture toughness with temperature was attributed two different mechanisms, namely, the relaxation process in a relatively low temperature and thermal blunting of the crack tip at higher temperature. The temperature-dependent fracture toughness data obtained in static tests could be horizontally shifted to match roughly the data for impact tests, indicating the existence of a time-temperature equivalence relationship. (C) 1995 John Wiley & Sons, Inc.

Antioxidant activity of sulfated polysaccharide fractions extracted from Laminaria japonica

Fucoidan, a group of sulfated heteropolysaccharide, was extracted from Laminaria japonica, an important economic alga species in China. Three sulfated polysaccharide fractions (F1, F2, and F3) were successfully isolated through anion-exchange column chromatography and had their antioxidant activities investigated employing various established in vitro systems, including superoxide and hydroxyl radical scavenging activity, chelating ability, and reducing power. Chemical analysis suggested that F1 and F3 were heteropolysaccharide in which galactose was the major component, while F2 was a typical fucoidan. All fractions possessed considerable antioxidant activity, and F1, F2 and F3 had stronger antioxidant ability than fucoidan in certain tests. The correlation between the sulfate content and scavenging superoxide radical ability was positive. Available data obtained with in vitro models suggested that the ratio of sulfate content/fucose was an effective indicator to antioxidant activity of the samples. (C) 2007 Elsevier B.V. All rights reserved.